Kompilatorfeil

[ww.strapetz]

Hallo,

etter nyinstallasjon av Raspian Buster og etter en oppdatering med

> sudo apt update && sudo apt upgrade

deretter

> sudo apt raspi-config

aktiverte i2c i grensesnittene.

Veiledning derfra: https://developer-blog.net/raspberry-pi-i2c-aktivieren/ fulgt, og dermed viser følgende cmd deretter følgende (OBS: kun synlig med 1)

> sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: — — — — — — — —
10: — — — — — — — — — — — — — — — —
20: — — — — — — — — — — — — — — — —
30: — — — — — — — — — — — — — — — —
40: — — — — — — — — 48 49 — — — — — —
50: — — — — — — — — — — — — — — — —
60: — — — — — — — — — — — — — — — —
70: — — — — — — — —

viser dessverre

> sudo ./updater.sh

…

Compiling OSPi firmware…
found ADS1115
/usr/bin/ld: /tmp/ccY778qj.o: in function `flow_poll()’:
/home/wilhelm/OpenSprinkler-Firmware/main.cpp:109: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::begin()’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:944: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:946: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:947: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:948: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:950: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:959: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:977: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:979: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:981: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1002: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1003: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::apply_all_station_bits()’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1311: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1323: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1325: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1329: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o:/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1348: more undefined references to `digitalWrite(int, unsigned char)’ follow
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::detect_binarysensor_status(unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1385: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1386: undefined reference to `digitalRead(int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1415: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1416: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::detect_programswitch_status(unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1450: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1451: undefined reference to `digitalRead(int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1462: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1463: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `transmit_rfbit(unsigned long, unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1859: undefined reference to `gpio_write(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1861: undefined reference to `gpio_write(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::switch_rfstation(RFStationData*, bool)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1908: undefined reference to `gpio_fd_open(int, int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1910: undefined reference to `gpio_fd_close(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::switch_gpiostation(GPIOStationData*, bool)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1925: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1927: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1929: undefined reference to `digitalWrite(int, unsigned char)’
collect2: error: ld returned 1 exit status
Done!
./updater.sh: line 5: /etc/init.d/OpenSprinkler.sh: No such file or directory

Finnes det en løsning på dette?

Takk og vennlig hilsen fra Wien

Willy

[Admin]

Hallo,

her står den anbefalte fremgangsmåten:

OpenSprinkler OSPI – Instruksjoner

Eller

OSPi med ny kjerne

 

[ww.strapetz]

Hei admin,

jeg gikk frem på følgende måte dagen etter:

• Nyinstallasjon med Debian bookworm x32
• Deretter aktiverte jeg i2c
• Lastet ned GitHub-kilde
• Nå lar OpenSprinkler seg kompilere
• Spørsmålet om init-filen skal opprettes, svarer jeg ja på

Etter første oppstart får jeg imidlertid alltid følgende melding i nettleseren:

The request was to large

en sjekk av sudo /etc/init.d/OpenSprinkler.sh status viser:

● OpenSprinkler.service – LSB: Open Sprinkler Raspberry Pi
Loaded: loaded (/etc/init.d/OpenSprinkler.sh; generated)
Active: active (running) since Mon 2024-06-03 21:13:20 CEST; 1min 45s ago
Docs: man:systemd-sysv-generator(8)
Process: 1569 ExecStart=/etc/init.d/OpenSprinkler.sh start (code=exited, status=0/SUCCESS)
Tasks: 1 (limit: 1556)
CPU: 574ms
CGroup: /system.slice/OpenSprinkler.service
└─1581 /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler

Jun 03 21:13:20 ospi systemd[1]: Starting OpenSprinkler.service – LSB: Open Sprinkler Raspberry Pi…
Jun 03 21:13:20 ospi systemd[1]: Started OpenSprinkler.service – LSB: Open Sprinkler Raspberry Pi.

Først etter omstart med sudo /etc/init.d/OpenSprinkler.sh restart

kan man også få tilgang til OpenSprinkler WebPortal.

Dessverre får jeg nettlesermeldingen etter hver omstart: The request was to large

Finnes det en løsning på dette også?

Takk og vennlig hilsen fra Wien

Willy

[Admin]

«The request was to large» i nettleseren: Den prøver å få tilgang til siden via https, det fungerer ikke. Bruk http!

Altså http://ip-adresse:8080

Hvor ip-adresse er adressen til din Raspberry Pi.

https fungerer kun med et gyldig sertifikat ved hjelp av en webserver / proxy.

Dette ble beskrevet her:
https://opensprinklershop.de/forums/topic/trick-nr-3-https-mit-ospi-und-raspberry-pi/

 

[ww.strapetz]

Hallo,

Problem: «The request was to large»

løst på følgende måte:

Logg inn som root-bruker – dermed slipper man å angi sudo ved alle kommandoer!

> sudo su

flyttet gammelt init-skript

> mv /etc/init.d/OpenSprinkler.sh /home/Name-User

Last ned / kompiler OpenSprinkler-programvaren i mappen /root

> apt-get install build-essential

> git clone https://github.com/OpenSprinkler/OpenSprinkler-Firmware.git

> cd OpenSprinkler-Firmware

> ./build.sh ospi

–> Spørsmål om OpenSprinkler.sh også skal installeres: y

> reboot

Nå fungerer det 

Vennlig hilsen fra Wien Willy

[Author]

Innlegg