Compiler fejl

[ww.strapetz]

Hej,

efter geninstallation af Raspian Buster og efter en opdatering

> sudo apt opdatering && sudo apt opgradering

derefter

> sudo apt raspi-config

i2c er aktiveret i interfaces.

Instruktioner derfra: https://developer-blog.net/raspberry-pi-i2c-activate/ fulgt og følgende cmd viser derefter følgende (opmærksomhed er kun synlig med 1)

> sudo i2cdetect -y 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: — — — — — — — —
10: — — — — — — — — — — — — — — — —
20: — — — — — — — — — — — — — — — —
30: — — — — — — — — — — — — — — — —
40: — — — — — — — — 48 49 — — — — — —
50: — — — — — — — — — — — — — — — —
60: — — — — — — — — — — — — — — — —
70: — — — — — — — —

viser desværre

> sudo ./updater.sh

…

Kompilerer OSPi-firmware...
found ADS1115
/usr/bin/ld: /tmp/ccY778qj.o: in function `flow_poll()’:
/home/wilhelm/OpenSprinkler-Firmware/main.cpp:109: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::begin()’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:944: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:946: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:947: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:948: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:950: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:959: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:977: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:979: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:981: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1002: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1003: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::apply_all_station_bits()’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1311: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1323: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1325: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1329: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o:/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1348: more undefined references to `digitalWrite(int, unsigned char)’ follow
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::detect_binarysensor_status(unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1385: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1386: undefined reference to `digitalRead(int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1415: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1416: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::detect_programswitch_status(unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1450: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1451: undefined reference to `digitalRead(int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1462: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1463: undefined reference to `digitalRead(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `transmit_rfbit(unsigned long, unsigned long)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1859: undefined reference to `gpio_write(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1861: undefined reference to `gpio_write(int, unsigned char)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::switch_rfstation(RFStationData*, bool)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1908: undefined reference to `gpio_fd_open(int, int)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1910: undefined reference to `gpio_fd_close(int)’
/usr/bin/ld: /tmp/ccGGSA5l.o: in function `OpenSprinkler::switch_gpiostation(GPIOStationData*, bool)’:
/home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1925: undefined reference to `pinMode(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1927: undefined reference to `digitalWrite(int, unsigned char)’
/usr/bin/ld: /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler.cpp:1929: undefined reference to `digitalWrite(int, unsigned char)’
collect2: error: ld returned 1 exit status
Done!
./updater.sh: line 5: /etc/init.d/OpenSprinkler.sh: No such file or directory

Gibt es dafür eine Lösung?

Tak og venlig hilsen fra Wien

Willy

[Admin]

Hej,

her er den anbefalede fremgangsmåde:

OpenSprinkler OSPI – Instruktioner

Hhv.

OSPi med ny kerne

 

[ww.strapetz]

Hej admin,

Jeg gjorde dette dagen efter:

• Geninstallation med Debian bookworm x32
• Så blev i2c aktiveret
• GitHub-kilden er indlæst
• OpenSprinkler kan nu kompileres
• Spørgsmålet om init-filen skal oprettes svarer jeg med ja

Men efter den første start får jeg altid følgende besked i browseren:

Anmodningen var for stor

en kontrol af sudo /etc/init.d/OpenSprinkler.sh status viser:

● OpenSprinkler.service – LSB: Open Sprinkler Raspberry Pi
Indlæst: indlæst (/etc/init.d/OpenSprinkler.sh; genereret)
Aktiv: aktiv (kører) siden man 2024-06-03 21:13:20 CEST; 1 min 45 s siden
Dokumenter: man:systemd-sysv-generator(8)
Proces: 1569 ExecStart=/etc/init.d/OpenSprinkler.sh start (kode=afsluttet, status=0/SUCCES)
Opgaver: 1 (grænse: 1556)
CPU: 574ms
CGroup: /system.slice/OpenSprinkler.service
└─1581 /home/wilhelm/OpenSprinkler-Firmware/OpenSprinkler

Jun 03 21:13:20 ospi systemd[1]: Starter OpenSprinkler.service – LSB: Open Sprinkler Raspberry Pi...
Jun 03 21:13:20 ospi systemd[1]: Startet OpenSprinkler.service - LSB: Open Sprinkler Raspberry Pi.

Genstart kun med sudo /etc/init.d/OpenSprinkler.sh

OpenSprinkler WebPortal kan også tilgås.

Desværre får jeg efter hver genstart browsermeddelelsen: Anmodningen var for stor

Er der også en løsning på dette?

Tak og venlig hilsen fra Wien

Willy

[Admin]

“The request was to large” i browseren: Du forsøger at få adgang til siden via https, det virker ikke. Brug http!

Altså http://ip-adresse:8080

Hvor ip-adresse er adressen på din Raspberry Pi.

https virker kun med et gyldigt certifikat ved hjælp af en webserver / proxy.

Her blev det beskrevet:
https://opensprinklershop.de/forums/topic/trick-nr-3-https-mit-ospi-und-raspberry-pi/

 

[ww.strapetz]

Hej,

Problem: "Anmodningen var for stor"

løst som følger:

Start med root-bruger - dette eliminerer behovet for at angive sudo for alle kommandoer!

> sudo su

flyttet gammelt init-script

> mv /etc/init.d/OpenSprinkler.sh /home/Name-User

Download/kompilér OpensSprinkler-softwaren i /root-mappen

> apt-get install build-essential

> git klon https://github.com/OpenSprinkler/OpenSprinkler-Firmware.git

> cd OpenSprinkler firmware

> ./build.sh ospi

–> Spørgsmål om OpenSprinkler.sh også skal installeres: y

> genstart

Nu virker det 

Venlig hilsen fra Wien Willy

[Author]

Indlæg