Firmware AC 3.2 Ethernet Beta
- This topic has 5 replies, 1 voices, and was last updated 4 years, 11 months ago from
admin.
- AuthorPosts
- April 21, 2019 at 2:02 pm #962
adminAdministratorFirmware for using the Ethernet interface with OpenSprinkler 3.2 AC
April 21, 2019 at 2:17 pm #965adminAdministratorOfficial release!
Download at: os_fw218(4).zipPlease note:
– Use this update ONLY WITH MODEL AC 3.2 ETHERNET! Otherwise, devices without Ethernet will get stuck in a permanent loop. If you have done this with a 3.0, send in the device and I can repair or flash it again!
– Unzip the zip file before installing!
– Save settings before installation with “Export Menu/Configuration”
– Installation is only possible via the W-Lan interface!
– Installation can with http://ip-adresse-opensprinkler-wlan/update be executed, where ip-address-opensprinkler-wlan is the IP address of the OpenSprinker (press B1 for the IP)
– The Ethernet interface must be used when starting the OpenSprinklers be plugged in. Subsequent insertion does NOT activate the interface.
– The firmware can be replaced at any time with the original firmware, plus the firmware from here useApril 23, 2019 at 1:25 pm #1047adminAdministratorBeta 2 available:
– Weather fixed
– Fixed endless loop/reboot without cableUpdated download link above
April 24, 2019 at 8:14 pm #1067adminAdministratorBeta 3 available:
– Buttons fix (B1 and B2 didn't work)
– Current adjustments from firmware 218.3 installedApril 25, 2019 at 0:40 pm #1110adminAdministratorBeta 4 available:
– NTP time synchronization over LAN fixMay 15, 2019 at 20:40 pm #1591adminAdministratorOfficial version available.
Sourcecode soon available on GitHib!
https://github.com/OpenSprinkler/OpenSprinkler-FirmwareDownload at: os_fw218(4).zip
- AuthorPosts
- You must be logged in to reply to this topic.