Firmware AC 3.2 Ethernet Beta

[Admin]

Firmware for using the Ethernet interface with the OpenSprinkler 3.2 AC

[Admin]

Official version!
Download at: os_fw218(4).zip

Notes:
– Use this update ONLY FOR MODEL AC 3.2 ETHERNET! Otherwise, devices without Ethernet will end up in a permanent loop. So if you did this with a 3.0, send the device in and I can repair or re-flash it!
– Unzip zip file before installation!
– Before installation, save settings with “Menu/Export configuration”
– Installation is only possible via the WiFi interface!
– Installation can be done with http://ip-adresse-OpenSprinkler-wlan/update be executed, where ip-address-OpenSprinkler-wlan is the IP address of the OpenSprinkler (press B1 for the IP)
– The Ethernet interface must be plugged in when starting the OpenSprinkler. Plugging it in later does NOT activate the interface.
– The firmware can be replaced at any time with the original firmware, including the firmware from here use

[Admin]

Beta 2 available:
– Weather fixed
– Endless loop/reboot without cable fixed

Download link above has been updated

[Admin]

Beta 3 available:
– Buttons fixed (B1 and B2 did not work)
– Current adjustments from firmware 218.3 installed

[Admin]

Beta 4 available:
– NTP time synchronization via LAN fix

[Admin]

Official version available.
Source code soon available on GitHib!
https://github.com/OpenSprinkler/OpenSprinkler-Firmware

Download at: os_fw218(4).zip

[Author]

Posts