OpenSprinkler professional configurator

AC top-hat rail power supply (without cable)
Select power based on the quantity of solenoid valves to be activated at the same time

DC top-hat rail power supply including adapter cable
Select power based on the quantity of solenoid valves to be activated at the same time

For outdoor installation, the OpenSprinkler requires a waterproof housing.
With these DIN rail brackets you can install the OpenSprinkler in a housing with DIN rails / DIN rail brackets

The Hunter Rain-Clik reacts particularly quickly to the onset of rain. This means that ongoing irrigation is reliably stopped or not started at all.
Simply connect the sensor to SEN1 + GND

The Truebner RS485 adapter allows you to connect up to 4x16 Truebner RS485 sensors, e.g. the SMT100 or TH100

The SMT100 developed and manufactured by Truebner combines the advantages of an inexpensive FDR sensor with the accuracy of a TDR measurement. As with a TDR, the permittivity of the soil is determined from the signal transit time and, as with FDR, this is converted into an easily measurable frequency. In contrast to FDR, a capacity is not simply determined, but rather the transit time is converted into a frequency using a ring oscillator. The resulting frequency (>100 MHz) is high enough so that measurements can also be carried out well in clayey soils.

The Truebner TH100 is a high-precision air temperature and humidity sensor with an RS485 Modbus interface.
The special feature is that the sensors are located in a radiation protection housing.

The TrueCon 100 is a cost-effective connection box that connects either up to 10 RS-485 or up to 10 SDI-12 sensors to a logger or to a PC via an interface. Thanks to the possibility of further connection, larger systems can also be implemented.

Expands the OpenSprinkler by 16 additional zones. Up to 4 zone expanders can be connected.
Choose the zone expander to match your OpenSprinkler.