Problems with Zone Expander

[K-H Höfkens]

Hello,

I have a constellation with an analog sensor board and zone expander and the LAN connection is not connected. After a delayed commissioning of the Zone Expander, nothing related to the new valve group (3 valves) no longer works properly. However, I also lack any information about the zone expander. I couldn't find anything in the download area either. Can someone give me the information where I can find it?
Can you see any wiring errors in the picture?

The red wires are outputs 1-8 on the Ospi and 1 on the Zone Expander
Channel 17 works if 18 and 19 are not connected to the valves.

[K-H Höfkens]

Possibly found an error...

If I don't use port 8 on the Ospi, port 1 on the Zone Expansion works as port 8 (S8) and port 2 on the Zone Expansion works as port 9 (S9).

Can anyone confirm this?

[Admin]

Hello, I think you connected something wrong. The outputs are switched completely digitally via the I2C bus. Either it switches or not at all. Unfortunately, you cannot see in the picture where the zone expander connection 1 is connected.

[Author]

Posts